Treadmill belts, also known as running belts, are an important part of a treadmill. There are some common problems that may occur with running belts during use. Here are some common running belt problems and their possible causes and solutions:
Running belt slipping:
Causes: the running belt is too loose, the surface of the running belt is worn, there is oil on the running belt, the treadmill multi-groove belt is too loose.
Solution: Adjust the rear pulley balance bolt (rotate it in clockwise direction until it is reasonable), check the three connecting wires, replace the electronic meter, and adjust the fixed position of the motor.
Running belt offset:
Reason: unbalance between the front and rear axles of the treadmill, not very standard running posture during exercise, uneven force between left and right feet.
Solution: adjust the balance of the rollers.
Running belt looseness:
Reason: The belt may become slack after long time use.
Solution: Adjust the tension of the belt by tightening the bolt.
Running belt deterioration:
Cause: The belt deteriorates after a long period of use.
Solution: Replace the belt and check the wear and tear of the belt regularly and replace it in time.
Turn on the power to open the power switch power indicator light does not light:
Reason: the three-phase plug is not inserted in place, the wiring inside the switch is loose, the three-phase plug is damaged, the switch may be damaged.
Solution: try several times, open the upper shroud to check whether the wiring is loose, replace the three-phase plug, replace the switch.
Buttons do not work:
Reason: key aging, key circuit board becomes loose.
Solution: Replace the key, lock the key circuit board.
Motorized treadmill cannot accelerate:
Reason: the instrument panel is damaged, the sensor is bad, the driver board is bad.
Solution: check the line problems, check the wiring, replace the driver board.
There is a murmur when exercising:
Reason: the space between the cover and the running belt is too small leading to friction, foreign objects are rolled in between the running belt and the running board, the running belt deviates from the belt seriously and rubs against the sides of the running board, and the motor noise.
Solution: correct or replace the cover, remove the foreign matter, adjust the balance of the running belt, replace the motor.
The treadmill stops automatically:
Reason: short circuit, internal wiring problems, drive board problems.
Solution: double check the line problems, check the wiring, replace the driver board.
Summarize: when encountering these common problems, you can refer to the above methods to solve them. If it cannot be solved, it is recommended to contact professional maintenance personnel for inspection and repair to ensure the normal use and safety performance of the treadmill. Meanwhile, in order to prevent the occurrence of running belt problems, it is recommended to carry out regular maintenance and repair, such as checking the wear and tear of the belt and adjusting the belt tension.
Post time: Jan-02-2024